| Colors
Used |
How
to Apply |
| 100 Base Coat Sealer |
Spray 2 coats over entire
fish |
| 971 Silver Metallic |
Entire Fish |
| 702 Pure White |
Lower belly and inside mouth |
| 201 Rich Brown |
Spray lightly from eye to tail
approximately 3 inches wide |
| 602 Paynes Grey |
Top of back, upper fins, tail
and pectoral fin. |
| 503 Sailfish Blue |
Same as 602 |
| 961 Grey Pearl |
Sides and upper belly |
| 601 Jet Black |
Darken fins, tail, pectorals and
top of back |
| 971 Silver Metallic |
Create vertical stripes |
| 911 Iridescent Red |
Lightly on lower sides |
| 941 Iridescent Green |
Lower jaw. Spray from tail to
head direction on sides and back |
| 951 Iridescent Blue |
Spray for head to tail direction
on top of head and upper sides |
| 101 Gill Red |
Gills |
| 102 Natural Flesh |
Vent and
lightly in mouth |
| Gloss |
2 to 3 coats. Allow at least 15
minutes between coats. |
| NOTES:
This is a tough fish to get right. Good reference is a must. The vertical
side markings run the spectrum of colors. If you can imagine pouring paint
down the length of the fish from the top.......that's what the side
markings look like. Good Luck : ) |
